What got replaced
Owners who name the part that was replaced mention the master cylinder (153 reports), the booster (136 reports), the ABS module (20 reports) and the pads and rotors (14 reports).
Recalls and investigations
2 recalls on the brakes cover the 2014 model year. A recall on the same system isn't always the same failure, so read the defect text.
20V-332Jun 8, 2020
Service Brakes, Hydraulic:Foundation Components:Master Cylinder
Ford Motor Company (Ford) is recalling certain 2014-2017 F-150 pickup trucks equipped with 3.5L Ecoboost engines. The brake master cylinder may leak brake fluid into the brake booster.
Risk and remedy
Risk: A loss of brake fluid may result in a change in brake pedal travel and feel, increased pedal effort and reduced front brake function, possibly requiring greater effort and distance to stop the vehicle. These conditions can increase the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the brake master cylinder and inspect the brake booster, replacing it as necessary, free of charge. Ford issued owners an interim notification on June 30, 2020. The recall began on October 28, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S31.
16V-345May 24, 2016
Service Brakes, Hydraulic:Fluid
Ford Motor Company (Ford) is recalling certain model year 2013-2014 F-150 vehicles manufactured August 1, 2013, to August 31, 2014 equipped with 3.5L engines. The master cylinder rear cup seal may roll, resulting in brake fluid leakage from the primary reservoir into the brake booster.
Risk and remedy
Risk: Loss of brake fluid from the primary reservoir results in a complete loss of front brake function, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the brake master cylinder and, if necessary, the brake booster, free of charge. The recall began on October 28, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S24.
NHTSA investigations into the brakes on the F-150
RQ16-001opened Sep 28, 2016
Brakes · model years 2015 to 2016
Brake master cylinder failure. Closed jul 5, 2020, led to recall 20V-332.
NHTSA summary
On June 8, 2020, Ford Motor Company issued a safety recall (NHTSA Recall No. 20V-332) of 292,311 model year (MY) 2014-2017 Ford F-150 vehicles equipped with 3.5L Ecoboost engines and built from 9/1/2014 to 8/1/2016. Ford stated that the causes of brake fluid loss in the master cylinder are brake fluid contamination that can interfere with rear cup seal function, and rolling of the rearmost cup seal.Prior to total loss of the front brakes, depending on the amount of brake fluid loss in the master cylinder, the driver may receive an audible chime, message center alert and red brake warning indicator in the instrument cluster, and may experience a change in brake pedal travel and increased pedal effort. It should be noted that a small number of late-built MY 2014 and early-built MY 2017 F-150 vehicles are included in the recall along with the subject vehicles (MY 2015-2016).This Recall Query is closed based on the safety recall issued by Ford. The ODI reports cited above can be viewed at NHTSA.gov under the following ID numbers:10734951 10839988 10862418 10872737 10873438 10876359 10881590 10883442 10885352 10888026 10888524 10891826 10891829 10891886 10893632 10894688 10894844 10896122 10896446 10898079 10899093 10899198 10902944 10903776 10904695 10908281 10910101 10913678 10913867 10914016 10914164 10914288 10914361 10914382 10914483 10914507 10915027 10915894 10916302 10916346 10916578 10920258 10925699 10926076 10926148 10926179 10927388 10927402 10927459 10927578 10928457
PE16-003opened Feb 29, 2016
Brakes · model years 2013 to 2014
Master cylinder external leak. Closed jul 26, 2016, led to recall 16V-345.
NHTSA summary
On May 23, 2016, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA regarding a master cylinder defect that could result in loss of the front brake circuit in approximately 225,012 model year 2013 through 2014 Ford F-150 vehicles equipped with 3.5-liter GTDI engines and built at the Dearborn Truck Plant from August 1, 2013 through August 22, 2014; and the Kansas City Assembly Plant from August 1, 2013 through August 31, 2014 (NHTSA Recall #16V-345, Ford Recall #16S24).Ford indicated that the rearmost cup seal in the brake master cylinder may roll, resulting in leakage from the brake fluid reservoir to the brake booster.According to Ford's DIR, Depending on the amount of brake fluid loss from the brake master cylinder into the brake booster, the driver will experience an audible chime, message center alert, red brake warning light in the instrument cluster and may begin to experience a change in brake pedal travel and feel.In the event that a loss of brake fluid is substantial enough to reduce brake function to the front wheels, the driver may experience longer pedal travel, increased pedal effort, and extended stopping distance, increasing the risk of a crash.Full braking function would remain in the rear wheel brake circuit.Ford's recall will replace the master cylinder and, if the master cylinder is leaking, also replace the brake booster.Seventy-three (73) of the complaints received by ODI contained vehicle identification number (VIN) informatio
EA15-006opened Oct 16, 2015
Service Brakes, Electric · model years 2011 to 2012
Brake vacuum pump failure. Closed apr 28, 2016.
NHTSA summary
On February 15, 2016, Ford Motor Company initiated Customer Satisfaction Program 15N05 to extend warranty coverage for the electric vacuum pump in certain model year (MY) 2011 through 2012 Ford F-150 pickup trucks equipped with 3.5L GTDI engines.The program extends coverage for up to 10 years of service or 150,000 miles from the warranty start date of the vehicle, all vehicles are eligible for the program through July 30, 2016 regardless of mileage.Ford's program covers all repairs related to electric vacuum pump (EVP) malfunctions including excessive noise, vibration, or change in brake pedal feel while applying the brakes at cold start. Ford states that the engine intake manifold is the primary source of vacuum for the brake booster and is fully compliant to motor vehicle safety standards without the supplemental vacuum supplied by the EVP.The company also contends that failure modes related to the EVP are progressive and provide warning to operators by way of noise and vibration before an operator to experience any temporary change in brake pedal feel.ODI's analysis of warranty data found that the majority of claims involved consumer concerns with EVP noise or vibration from the left front fender area when the vehicle is first started. Continued operation in this mode with pump motor noise will eventually result in the EVP seizing or becoming non-functional.Component failure analysis indicated that Ford and its supplier, Continental, identified a pump crank drive corrosion
PE15-026opened Jun 22, 2015
Service Brakes, Electric · model years 2011 to 2012
Brake vacuum pump failure. Closed oct 19, 2015.
NHTSA summary
On June 22, 2015, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE15-026 to investigate incidents of increased brake pedal effort at cold start and extended stopping distance while driving in traffic, resulting from failures of the electric brake vacuum assist pump in model year (MY) 2011-2012 Ford F-150 pickup trucks equipped with 3.5L GTDI engines. In response to ODI's Information Request (IR) for PE15-026, Ford provided ODI with 396 complaints and field reports relating to incidents of increased brake pedal effort or malfunctions in the electric vacuum pump (EVP). ODI's analysis of the data provided by Ford identified 7 crashes and 1,851 warranty claims related to either a hard brake pedal condition or reduced brake effectiveness. Additionally, ODI identified one report in its database alleging an injury to an occupant of a vehicle struck in the rear by a subject F-150 vehicle with a failed EVP as documented in the police accident report referencing a dealer assessment of the pump.According to Ford, the subject vehicles utilize a traditional brake vacuum booster to provide power assist for braking and the EVP is intended to operate to maintain consistent brake pedal feel. The engine intake manifold is the primary source of vacuum for the booster and is fully compliant to motor vehicle safety standards without the EVP. Ford described the conditions related to a change in brake pedal feel as limited and temporary and provided component failure anal
PE08-001opened Jan 8, 2008
Service Brakes, Hydraulic · model years 2005 to 2006
Loss of brake power-assist. Closed may 9, 2008, led to recall 08V-208.
NHTSA summary
BY LETTER DATED MAY 5, 2008, FORD MOTOR COMPANY (FORD) NOTIFIED THE AGENCY THAT IT WILL CONDUCT A SAFETY RECALL (NHTSA RECALL NUMBER 08V-208) TO ADDRESS A MANUFACTURING DEFECT IN APPROXIMATELY 605,684 MODEL YEAR (MY) 2005 AND 2006 FORD F-150 AND LINCOLN MARK LT VEHICLES ORIGINALLY EQUIPPED WITH THE 5.4L DISPLACEMENT, 3-VALVE PER CYLINDER, V-8 ENGINE.THE RECALLED VEHICLES WERE BUILT FROM JULY 18, 2004 THROUGH MAY 31, 2006 AT THE DEARBORN TRUCK PLANT; FROM MAY 4, 2004 THROUGH MAY 31, 2006 AT THE KANSAS CITY ASSEMBLY PLANT; AND FROM APRIL 19, 2004 THROUGH MAY 31, 2006 AT THE NORFOLK TRUCK PLANT.THE VEHICLES WERE MANUFACTURED WITH THE SAME DEFECTIVE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY UNIQUE TO THE 5.4L V-8 ENGINE.FORD F-150 VEHICLES EQUIPPED WITH OPTIONALLY AVAILABLE 4.2L V6 AND 4.6L V-8 ENGINES ARE NOT INCLUDED IN THIS RECALL ACTION BECAUSE THEY UTILIZE A DIFFERENT, ONE-PIECE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY THAT DOES NOT EXHIBIT AN APPARENT DEFECT TREND. THE RECALLED VEHICLES UTILIZE A TWO-PIECE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY COMPRISED OF A STANDPIPE ASSEMBLY AND VACUUM HOSE.THE STANDPIPE ASSEMBLY ATTACHES TO A FITTING ON THE ENGINE AIR INTAKE MANIFOLD UTILIZING A FLEXIBLE RUBBER HOSE AND PLASTIC ELBOW.THE VACUUM HOSE ATTACHES TO THE OPPOSITE END OF THE STANDPIPE ASSEMBLY AND CONNECTS TO A CHECK VALVE FITTING AT THE BRAKE BOOSTER ASSEMBLY.ACCORDING TO FORD, THE PORTION OF THE BRAKE BOOSTER VACUUM SUPPLY HOSE ASSEMBLY ATTACHED TO THE INTAKE MANIFOLD MA
EA93-020opened Jul 28, 1993
Service Brakes, Hydraulic · model years 1992
Parking brake failure. Closed sep 23, 1994, led to recall 94V-169.
NHTSA summary
There is no summary currently available
PE93-015opened Mar 9, 1993
Service Brakes, Hydraulic · model years 1992
Parking brake failure. Closed jul 27, 1993.
NHTSA summary
There is no summary currently available
EA91-044opened Oct 30, 1991
Service Brakes, Hydraulic · model years 1991
Loss of brake effectivenes. Closed oct 30, 1992, led to recall 92V-026.
NHTSA summary
===
PE91-077opened May 23, 1991
Service Brakes, Hydraulic · model years 1991
Loss of brake effectivenes. Closed oct 31, 1991.
NHTSA summary
There is no summary currently available
What owners paid
24 of the 340 reports quote a price. Each dot is one quote. The middle half runs $897 to $2,900.
$0k$2k$4k$6k$8k
When it happens
The middle half of failures fell between 30,000 and 80,000 miles, from the 239 reports that gave a mileage.
2215
8616
2117
2618
4119
2520
2021
1922
2223
2224
2125
1526