Check engine light or misfire

Risk: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Risk: If the engine stalls, there is an increased the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the crankshaft or camshaft sensor connector, free of charge. The recall began February 8, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S89.

On December 13, 2016, the National Highway Traffic Safety Administration (NHTSA) received recall 16V-907 from Fiat Chrysler Automobiles (FCA) that identified a safety defect involving crankshaft or camshaft sensor failures on certain 2016 Model Year Dodge Journey, Jeep Compass, and Jeep Patriot vehicles. The failure of the crankshaft or camshaft sensor may lead to a loss of motive power (LOMP) in the recalled vehicles. Following the receipt of recall 16V-907, the Office of Defects Investigation (ODI) received 127 vehicle owner’s questionnaires (VOQ), in which consumers allege experiencing crankshaft or camshaft failures on similar vehicles not included in the recall. On July 22, 2022, this Recall Query was opened to further assess the scope, frequency, and safety consequences of the alleged defect described in the recall. During this investigation, ODI sent two information request (IR) letters to FCA. The first letter was sent on August 15, 2022, and the second on July 12, 2024. Responses to these IR letters, that included manufacturer claim data related to the alleged defect, were received on September 26, 2022, and September 6, 2024, respectively. Analysis of ODI and FCA claim data identified two failure modes relating to intermittent crankshaft and camshaft sensor loss of signal. The first failure mode involves a faulty crankshaft or camshaft electrical connector, as identified in recall 16V-907. The second failure mode involves a faulty crankshaft and/or camsh

In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 to evaluate the petition for a grant or deny decision. ODI analyzed complaint data provided by CAS as well as complaints submitted to ODI from consumers. In total, there were 296 complaints submitted by the petitioner in the original petition and five supplements, including 271 complaints related to the subject vehicles equipped with TIPM-7. Approximately 3 percent of CAS complaints are related to vehicles equipped with TIPM-6 and ODI?s review of these complaints did not identify any safety defect trends. ODI conducted a detailed review of complaints narratives submitted by CAS and consumers including careful analysis of vehicle repair histories, warranty claims obtained from the manufacturer and any available Customer Assistance Inquiry reports (CAIR). Analysis of the field data indicated that MY2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles exhibited significantly higher compla