Diagsheet

2019 Jeep Wrangler · recalls

2019 Jeep Wrangler recalls

NHTSA lists 9 recalls that include the 2019 Jeep Wrangler. The newest, 24V-676, was filed Sep 12, 2024 for the backup camera. 3 of them are on the transmission and drivetrain.

  • 9recalls
  • 6systems
  • 739owner complaints

Newest recall or investigation Sep 12, 2024 · checked Sep 22, 2026

Whether your car is included depends on its VIN, and a finished repair drops it off the list. Check yours at nhtsa.gov/recalls.

Every recall, newest first

24V-676Sep 12, 2024NHTSA 24V676000

Back Over Prevention: Sensing System: Camera

Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.

Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.

1 of the 739 owner complaints on this car cite the backup camera. Symptom sheets that include this system: Infotainment, screen or backup camera fails (37).

24V-652Sep 5, 2024NHTSA 24V652000

Electrical System: Instrument Cluster/Panel

Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."

Risk: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.

Remedy: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.

150 of the 739 owner complaints on this car cite the electrical system, 11 of them the same part of it (Electrical System: Instrument Cluster/Panel). Symptom sheets that include this system: Engine stalls or loses power while driving (49) · Multiple warning lights come on at once (39) · Infotainment, screen or backup camera fails (37) · Battery dies or the car will not start (29).

What owners wrote about instrument cluster/panel

“Instrument panel cluster failing making it difficult to determine mph, fuel in vehicle, mileage, etc. panel was flashing and blacking out while driving creating a distraction, photos could not be obtained during worst of incident because actively driving.”

Filed Jul 7, 2026

A complaint on the same system is not proof of the recalled defect.

23V-116Feb 23, 2023NHTSA 23V116000

Power Train:Clutch Assembly

Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Remedy: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.

78 of the 739 owner complaints on this car cite the transmission and drivetrain, 1 of them the same part of it (Power Train:Clutch Assembly). Symptom sheets that include this system: Engine stalls or loses power while driving (49).

What owners wrote about clutch assembly

“There was a recall done on the clutch system back in 2023 and now the same problem has occurred, and I have to replace my entire clutch system.”

Filed Jul 3, 2026

A complaint on the same system is not proof of the recalled defect.

21V-028Jan 28, 2021NHTSA 21V028000

Power Train:Clutch Assembly

Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Remedy: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.

78 of the 739 owner complaints on this car cite the transmission and drivetrain, 1 of them the same part of it (Power Train:Clutch Assembly). Symptom sheets that include this system: Engine stalls or loses power while driving (49).

What owners wrote about clutch assembly

“There was a recall done on the clutch system back in 2023 and now the same problem has occurred, and I have to replace my entire clutch system.”

Filed Jul 3, 2026

A complaint on the same system is not proof of the recalled defect.

20V-580Sep 24, 2020NHTSA 20V580000

Seat Belts

Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.

Risk: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.

Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.

6 of the 739 owner complaints on this car cite the seat belts.

20V-191Sep 10, 2020NHTSA 20V191000

Back Over Prevention: Sensing System: Camera

Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

Risk: The lingering rearview image can distract the driver, increasing the risk of a crash.

Remedy: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.

1 of the 739 owner complaints on this car cite the backup camera. Symptom sheets that include this system: Infotainment, screen or backup camera fails (37).

20V-124Mar 3, 2020NHTSA 20V124000

Power Train:Clutch Assembly

Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

78 of the 739 owner complaints on this car cite the transmission and drivetrain, 1 of them the same part of it (Power Train:Clutch Assembly). Symptom sheets that include this system: Engine stalls or loses power while driving (49).

What owners wrote about clutch assembly

“There was a recall done on the clutch system back in 2023 and now the same problem has occurred, and I have to replace my entire clutch system.”

Filed Jul 3, 2026

A complaint on the same system is not proof of the recalled defect.

19V-201Mar 14, 2019NHTSA 19V201000

Steering

Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.

Risk: If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.

Remedy: Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge. The recall began April 5, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V29.

445 of the 739 owner complaints on this car cite the steering system. Symptom sheets that include this system: Steering wheel shakes or the "death wobble" (156) · Power steering cuts out or goes heavy (53).

18V-675Sep 28, 2018NHTSA 18V675000

Structure:Frame And Members

Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

Risk: An unexpected reduction in steering ability, can increase the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.

22 of the 739 owner complaints on this car cite the structure.

Complaints with no recall behind them

The systems owners of the 2019 Jeep Wrangler complain about most that none of these recalls covers, as of Sep 22, 2026. A problem can be widespread without being a safety defect NHTSA can order fixed.

NHTSA investigations

PE19-012opened Sep 16, 2019
Steering · model years 2018 to 2019

Frame weld deficiencies. Closed oct 29, 2023.

NHTSA summary
On September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These is
DP18-004opened Nov 16, 2018
Steering · model years 2018 to 2019

Frame weld deficiencies. Closed sep 17, 2019.

NHTSA summary
In a letter received on October 24, 2018, a citizen petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into frame weld deficiencies on model year (MY) 2018 'JL' Jeep Wrangler vehicles. The petitioner described a broad list of frame weld deficiencies, including porous welds, excessive slag, lack of weld penetration, over penetration of welds, overweld or weld drip, and weld splash. The weld defects are allegedly located at a variety of locations on the frame assembly.On November 16, 2018, the Office of Defects Investigation (ODI) opened a Defect Petition (DP18-004) to evaluate whether to grant or deny the petition. On March 8, 2019, ODI sent an Information Request letter to Fiat Chrysler Automobiles (FCA) requesting information on frame weld related issues on all MY 2018-2019 Jeep Wrangler 'JL' vehicles. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI opted to include a request for additional information concerning reports of steering shimmy or wobble, loose steering, and steering lockup in the March request letter. ODI has performed a preliminary analysis on the information obtained from FCA. Based on ODI's review of the applicable materials, NHTSA has decided to grant the petition. While reviewing the applicable materials obtained from the manufacturer, ODI identified various reports and references to frame welded component detach

More on the 2019 Jeep Wrangler

Problems by mileage on the 2019 Jeep Wrangler · Jeep Wrangler years to avoid

Recalls on other model years