Diagsheet

2016 Ford Mustang · recalls

2016 Ford Mustang recalls

NHTSA lists 5 recalls that include the 2016 Ford Mustang. The newest, 25V-614, was filed Sep 12, 2025 for the seat belts. 2 of them are on the seat belts.

  • 5recalls
  • 3systems
  • 376owner complaints

Newest recall or investigation Sep 12, 2025 · checked Sep 22, 2026

Whether your car is included depends on its VIN, and a finished repair drops it off the list. Check yours at nhtsa.gov/recalls.

Every recall, newest first

25V-614Sep 12, 2025NHTSA 25V614000

Seat Belts:Pretensioner

Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. Water and road salt may corrode the front seat belt anchor pretensioner cables.

Risk: A corroded cable can break, preventing the seat belt from properly restraining an occupant, and increasing the risk of injury during a crash.

Remedy: Dealers will inspect and replace both front seat belt anchor pretensioner assemblies, as necessary. In addition, dealers will remove sections of the carpet and underlayment that contact the cables. Dealers will also inspect the A-pillar sealing patches, and as necessary, install A-pillar body plugs, and/or inspect and replace the front outboard seat bolts. Repairs will be performed free of charge. Interim letters, notifying owners of the safety risk, were mailed October 20, 2025. Additional letters will be sent once the final remedy is available, anticipated December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S92. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov September 17, 2025.

10 of the 376 owner complaints on this car cite the seat belts.

25V-572Sep 4, 2025NHTSA 25V572000

Back Over Prevention: Sensing System: Camera

Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.

Risk: A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

Remedy: Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.

52 of the 376 owner complaints on this car cite the backup camera, 19 of them the same part of it (Back Over Prevention: Sensing System: Camera). Symptom sheets that include this system: Infotainment, screen or backup camera fails (68) · Backup camera goes black or freezes (50).

What owners wrote about camera

“Safety recall work for 22S06/ NHTSA 22V082 performed at dealer. Dealer confirmed that work was done correctly but the work as instructed from FORD did not correct the issue of rear view camera not working correctly. In fact it has made the condition worse. Recall issue as defined in 22S06 - The rear view camera could intermittently display a blank or distorted image05/19/”

Filed Jul 12, 2023

“Backup camera abruptly stopped working. It shows a hazy image with lines. There are recalls for 2016 Mustangs for that same issue, but none for my VIN.”

Filed Jun 10, 2023

A complaint on the same system is not proof of the recalled defect.

22V-082Feb 16, 2022NHTSA 22V082000

Back Over Prevention: Sensing System: Camera

Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. The rearview camera wiring may be loose or damaged, which can result in a blank or distorted image.

Risk: A rearview camera that displays a blank or distorted image can reduce the driver's rear view, increasing the risk of a crash.

Remedy: Dealers will inspect and repair the decklid wiring harness and/or replace the rearview camera, as necessary, free of charge. Owner notification letters were mailed December 23, 2022 and June 26, 2023. Remedy parts are expected to become available in the 4th Quarter of 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S06.

52 of the 376 owner complaints on this car cite the backup camera, 19 of them the same part of it (Back Over Prevention: Sensing System: Camera). Symptom sheets that include this system: Infotainment, screen or backup camera fails (68) · Backup camera goes black or freezes (50).

What owners wrote about camera

“Safety recall work for 22S06/ NHTSA 22V082 performed at dealer. Dealer confirmed that work was done correctly but the work as instructed from FORD did not correct the issue of rear view camera not working correctly. In fact it has made the condition worse. Recall issue as defined in 22S06 - The rear view camera could intermittently display a blank or distorted image05/19/”

Filed Jul 12, 2023

“Backup camera abruptly stopped working. It shows a hazy image with lines. There are recalls for 2016 Mustangs for that same issue, but none for my VIN.”

Filed Jun 10, 2023

A complaint on the same system is not proof of the recalled defect.

16V-779Oct 26, 2016NHTSA 16V779000

Engine And Engine Cooling:Cooling System:Hoses/Lines/Piping/Fittings

Ford Motor Company (Ford) is recalling certain model year 2015-2017 Mustang vehicles manufactured February 24, 2015, to August 30, 2016. A hose may separate from the engine oil cooler tube assembly causing an oil leak.

Risk: A sudden loss of engine oil may cause engine failure, increasing the risk of a crash. Additionally, an oil leak, in the presence of an ignition source, increases the risk of a fire.

Remedy: Ford will notify owners, and dealers will replace the engine oil cooler tube assembly, free of charge. The recall began on March 23, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S40.

8 of the 376 owner complaints on this car cite the engine and engine cooling. Symptom sheets that include this system: Engine stalls or loses power while driving (41) · Check engine light or misfire (34) · Engine overheats or leaks coolant (29) · Engine failure, knocking or rod bearing (26).

15V-707Oct 26, 2015NHTSA 15V707000

Seat Belts

Ford Motor Company (Ford) is recalling certain model year 2016 Ford Mustang vehicles manufactured September 26, 2015, to October 1, 2015. The front and rear seat belts and child seat tether anchors may have been damaged in shipping from the supplier to the vehicle assembly plant and may not adequately restrain the occupant in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 225, "Child restraint anchorage systems."

Risk: If the restraint components do not function as intended, the occupants may not be properly restrained in the event of a crash, increasing their risk of injury.

Remedy: Ford will notify owners, and dealers will replace the front and rear seat belt assemblies and the child seat tether anchors, free of charge. The recall began on December 18, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15C13.

10 of the 376 owner complaints on this car cite the seat belts.

Complaints with no recall behind them

The systems owners of the 2016 Ford Mustang complain about most that none of these recalls covers, as of Sep 22, 2026. A problem can be widespread without being a safety defect NHTSA can order fixed.

NHTSA investigations

EA21-002opened Sep 17, 2021
Airbags · model years 2015 to 2017

Desiccated air bag inflator rupture. Open.

NHTSA summary
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been n

More on the 2016 Ford Mustang

Problems by mileage on the 2016 Ford Mustang · Ford Mustang years to avoid

Recalls on other model years