Diagsheet

2015 Nissan Murano · symptom sheet

Brakes grind, pulse or wear early

  • 28owner reports
  • 45,000median miles
  • 1involved a crash

Newest report May 10, 2025 · checked Sep 9, 2026

28 of the 203 complaints on this car describe brake wear. Only airbag is reported more often on this car.

Tick what matches of 28 reports

2
1
12
3

What got replaced

Owners who name the part that was replaced mention the ABS module (10 reports).

Recalls and investigations

4 recalls on the brakes cover the 2015 model year. A recall on the same system isn't always the same failure, so read the defect text.

19V-807Nov 8, 2019
Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip

Nissan North America, Inc. (Nissan) is recalling certain 2015-2018 Nissan Murano, 2016-2018 Nissan Maxima, and 2017-2019 Nissan Pathfinder and Infiniti QX60 vehicles. These vehicles were previously recalled and unrepaired, or inspected and determined to not need a repair, under recall number 18V-601. In addition, this recall expands the previous population. The Anti-lock Brake System (ABS) actuator pumps may allow brake fluid to leak onto an internal circuit board.

Risk and remedy
Risk: A brake fluid leak on the circuit board may result in an electrical short, increasing the risk of a fire.
Remedy: Nissan will notify owners, and dealers will replace the ABS actuator, free of charge. Owners will receive a second notice when remedy parts become available, currently expected to be during summer 2020. Owners may contact Nissan customer service at 1-800-867-7669. Note: If the ABS warning light remains illuminated for more than 10 seconds after engine start up, owners are advised to park the vehicle outdoors away from other vehicles or structures and to not drive the vehicle.
18V-601Sep 7, 2018
Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip

Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Nissan Murano, 2016-2017 Nissan Maxima, 2017-2018 Nissan Pathfinder, and 2017 Infiniti QX60 vehicles. The Anti-Lock Brake (ABS) actuator pumps may allow brake fluid to leak onto an internal circuit board.

Risk and remedy
Risk: A brake fluid leak on the circuit board may result in an electrical short, increasing the risk of a fire.
Remedy: Nissan will notify owners, and dealers will inspect the serial number on the ABS actuator, replacing it as necessary, free of charge. The recall began October 29, 2018. Owners may contact Nissan customer service at 1-800-867-7669. Note: When brake fluid has leaked onto the circuit board, the ABS warning lamp will remain illuminated for more than 10 seconds after engine start up. If this occurs, owners are advised to park the vehicle outdoors away from other vehicles or structures and to not drive the vehicle.
16V-636Sep 2, 2016
Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip

Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima vehicles manufactured February 10, 2015, to August 19, 2016 and equipped with Intelligent Cruise Control, 2015-2017 Murano vehicles manufactured August 22, 2014, to August 19, 2016 and equipped with Intelligent Cruise Control, and 2015-2016 Murano Hybrid vehicles manufactured August 22, 2014, to July 19, 2016. The affected vehicles have Anti-Lock Brake (ABS) actuator pumps that may allow brake fluid to leak onto an internal electrical circuit board.

Risk and remedy
Risk: A brake fluid leak onto the circuit board may result in an electrical short, increasing the risk of a fire.
Remedy: Nissan will notify owners, and dealers will inspect the ABS Actuator, replacing it as necessary, free of charge. The recall began on December 12, 2016. Owners may contact Nissan customer service at 1-800-647-7261. Note: When brake fluid has leaked onto the circuit board, the ABS warning lamp will remain illuminated for more than 10 seconds after engine start up. If this occurs, owners are advised to park the vehicle outdoors away from other vehicles or structures and to not drive the vehicle.
15V-364Jun 10, 2015
Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip:Control Unit/Module

Nissan North America, Inc. (Nissan) is recalling certain model year 2015 Murano vehicles manufactured December 4, 2014, to March 17, 2015. These vehicles are equipped with Anti-Lock Braking System (ABS) actuators which may have contamination in the solenoid valves, potentially affecting the valves' ability to completely close and allow a build up of hydraulic brake pressure, or fully open and allow the hydraulic brake pressure to completely drop.

Risk and remedy
Risk: Under some driving conditions, when the ABS is activated, the malfunctioning ABS actuator could cause a loss of vehicle stability, increasing the risk of a crash.
Remedy: Nissan will notify owners, and dealers will inspect and replace the ABS actuator, as necessary, free of charge. The recall began on August 13, 2015. Owners may contact Nissan customer service at 1-800-647-7261.

NHTSA investigations into the brakes on the Murano

EA18-001opened Apr 18, 2018
Service Brakes, Hydraulic · model years 2009

Extended braking distances. Closed jan 17, 2023, led to recall 18V-916.

NHTSA summary
On April 18, 2018, the Office of Defects Investigation (ODI) opened Engineering Analysis (EA) 18-001 to investigate reports of braking concerns in model year (MY) 2009 Nissan Murano vehicles. A failure of the hydraulic control unit (HCU) portion of the antilock brake system (ABS), which involves improper operation of an internal hydraulic control valve(s), can cause extended brake pedal travel and may result in a reduction in overall braking effectiveness. Tier-one supplier Continental manufactured the HCU for Nissan.The corrosion-preventive, zinc coating used on the armatures of the normally closed (NC) valves within ABS HCU may react with brake fluids lacking sufficient corrosion-preventative additives. This reaction can cause the formation of a gelatinous material, which may cause the NC valves to close slowly. Over time, the gel can solidify to an extent such that the spring used to return the valve to the closed position may not be able to overcome the gel buildup, allowing the NC valve to remain open. If any of the four NC valves remains open, fluid will be diverted to one or two accumulator(s). This misdirected fluid has the net effect of causing brake pedal travel to increase, however enough stroke remains in the pedal to generate braking force. Although the hydraulic braking system remains intact and full braking force is maintained once the pedal travels the additional distance, when this condition occurs, the initial increase in brake pedal travel could result in i
PE17-002opened May 3, 2017
Service Brakes, Air · model years 2009

Extended braking distances. Closed may 4, 2018.

NHTSA summary
The Office of Defects Investigation (ODI) is closing this Preliminary Evaluation and upgrading to an Engineering Analysis (EA) 18-001.During the PE, ODI requested and reviewed information provided by Nissan including consumer complaints and other field and technical data related to failures of the hydraulic control unit (HCU), an electro-mechanical brake system component that provides antilock braking and other functionality in the subject model year (MY) 2009 Murano.The subject failure of the HCU, which involves improper operation of an internal hydraulic control valve, can cause extended brake pedal travel and may result in a reduction in overall braking effectiveness.Tier-one supplier Continental manufactured the HCU for Nissan.ODI currently recognizes 484 subject vehicle complaints that appear related to the alleged defect.Fourteen crash allegations, with three non-life threatening injuries are under evaluation also.ODI has been monitoring consumer complaints received, and in some cases has obtained suspect HCUs from complainants' vehicles.Recovered HCUs sent to NHTSA's Vehicle Research and Test Center (VRTC) in East Liberty, Ohio are under evaluation, and VRTC has conducted limited vehicle testing also.In a July 28, 2017 submission, Nissan acknowledged that a failure of the HCU can result in increased brake pedal travel during braking.Nissan's analysis of returned parts revealed that a zinc coating used on the normally closed valve assemblies inside the HCU may react wit

None of these investigations covers the 2015 model year.

When it happens

The middle half of failures fell between 15,000 and 60,000 miles, from the 18 reports that gave a mileage.

115
516
317
418
219
720
222
123
224
125

What owners wrote

“The car starts up the electrical on the dashboard ABS warning light comes on if the car starts it might start right off and drive just fine but then it shuts down into limp mode .”

Filed May 10, 2025

“The transmission started going out going around a corner passing a semi on a canyon road. There are thousands of reports of transmission issues with this year and model. Brakes shake and act like they will not engage.”

Filed Sep 7, 2022

“This car has had electrical issues from 2016 it's all in the carfax and it's caused me 2 accidents in less than 6 months and 1st was the car wouldn't stop like it's supposed to and it seemed like the assisted braking sometimes would kick in and out...then 2nd one air bag deployed with airbag turned off”

Filed May 1, 2022

Should you keep driving it?

This page can't tell you that. 1 of 28 reports involved a crash and 1 people were hurt. Owners who file are the ones who had a bad experience, and nobody checks their reports. If the problem affects steering, braking, power or a fire risk, treat it as a safety fault and have it inspected before a long or high-speed drive.

File your own report with NHTSA. Complaint counts are how a problem gets an investigation.

Other problems on this car